Wombat skeleton stock

  • Skip
  • Skip's Avatar
  • Away
  • Administrator
  • Administrator
  • Consistency is the key to marksmanship
More
13 May 2016 18:23 #41 by Skip
Replied by Skip on topic Wombat skeleton stock
Looking good there Combat Wombat, that new mill sure dose look purrdy :)

Please Log in to join the conversation.

  • Simplysideways
  • Visitor
  • Visitor
13 May 2016 20:18 #42 by Simplysideways
Replied by Simplysideways on topic Wombat skeleton stock
Any plans in doing some stocks for the Savage10 L/H ?
Cheers

Please Log in to join the conversation.

More
13 May 2016 20:41 #43 by Rhino77
Replied by Rhino77 on topic Wombat skeleton stock
Again great work Greg, a true art form B) I can't wait to get my hands (lefty dominant) on that beauty.

Please Log in to join the conversation.

  • Gregt
  • Gregt's Avatar Topic Author
  • Offline
  • Site Sponsor
  • Site Sponsor
  • XXX
More
13 May 2016 21:29 - 13 May 2016 21:34 #44 by Gregt
Replied by Gregt on topic Wombat skeleton stock

Simplysideways wrote: Any plans in doing some stocks for the Savage10 L/H ?
Cheers


I'll have to check the width to see if there's enough room for the top bolt release, I know it pokes a fair way out part the side of the action. I do have a LH Savage 10 stock here in the AICS/Viperskin style:

This image is hidden for guests.
Please log in or register to see it.



Rhino, I'm almost sorry to let it go once I got it all finished off and sat a rifle in it. I'll have to get machining to replace it now!

Guns don't kill people, Chuck Norris does.
Last edit: 13 May 2016 21:34 by Gregt.

Please Log in to join the conversation.

  • Simplysideways
  • Visitor
  • Visitor
13 May 2016 22:19 - 13 May 2016 22:20 #45 by Simplysideways
Replied by Simplysideways on topic Wombat skeleton stock

Gregt wrote:

Simplysideways wrote: Any plans in doing some stocks for the Savage10 L/H ?
Cheers


I'll have to check the width to see if there's enough room for the top bolt release, I know it pokes a fair way out part the side of the action. I do have a LH Savage 10 stock here in the AICS/Viperskin style:

This image is hidden for guests.
Please log in or register to see it.



Rhino, I'm almost sorry to let it go once I got it all finished off and sat a rifle in it. I'll have to get machining to replace it now!



I saw this Chassis on used guns a short while ago and sent you a message but got a message failure from UG , might be worth chasing them up about it.
Now I've a clearer pic , that must be the Vortex Pst I bought of you a last year :P :P
I've got the new Savage 10Flcp-Sr with the bolt release forward of the bolt cutout in your pic , Not sure if mine will fit
Last edit: 13 May 2016 22:20 by Simplysideways. Reason: Wrong emoji

Please Log in to join the conversation.

  • Gregt
  • Gregt's Avatar Topic Author
  • Offline
  • Site Sponsor
  • Site Sponsor
  • XXX
More
14 May 2016 05:02 #46 by Gregt
Replied by Gregt on topic Wombat skeleton stock
I just had a look at that rifle, they've moved the bolt release to the left side now? Savage seem to make a change every time they make a new rifle. There's enough material in the plate I use to put a bump on each side to clear the release but it'll be a few months before I'd get a chance to make one. I've got a few savages here so it wouldn't hurt to add those to the list.

Guns don't kill people, Chuck Norris does.

Please Log in to join the conversation.

  • Simplysideways
  • Visitor
  • Visitor
14 May 2016 12:09 #47 by Simplysideways
Replied by Simplysideways on topic Wombat skeleton stock
I'll grab a picture later on and pm you it as a,chassis is next on my to do list and there isn't many options for a LH Savage

Please Log in to join the conversation.

Moderators: Gregt
Time to create page: 0.256 seconds

magnum-voucher-sitewide

Login